Sim Pedals Pro Curved Pedal Plate Upgrade

This page contains instructions on installing and adjusting the Sim Pedals Pro Curved Pedal Plate Upgrade.

Installation

The curved pedal plates are an upgrade for Sim Pedals Pro which originally came with flat pedal plates. The curved pedal plates will improve the positioning of your feet on the pedals and enhancing the overall feel of the pedals.

In order to install the Curved Pedal Plates, follow these steps:

  • 1) Remove your original pedal plates. This requires loosening the nut from the bolt at the back of the pedal plate. This can be done with the wrench and 3mm hex key supplied in the toolkit which came with your pedal set.
  • 2) Install the new curved plate in any of the 3 available positions on the pedal arm. Make sure the notches on the pedal arm fall into the holes of the curved pedal plate.
  • 3) Fasten the curved pedal plate using the original fastening materials. In case there is only a small amount of bolt thread available for the nut to be mounted on, you may discard the metal washer which originially sat between the nut and the pedal plate.
  • 4) Do not overtighten the nut. If you use too much force you will be able to ‘flatten’ the curve in the plate.

Need help?

If you need further technical support with regard to this product, don’t hestitate to get in touch with us.

View contact information

used by

Frederik Vesti

Multiple karting champion and Danish & ADAC F4 race winner

Read the case

Amaury Bonduel

Multiple karting champion

Read the case

Tanner Whitten

FIA World RallyCross RX2 podium finisher

Read the case

Mathias Beche

European Le Mans Series Champion & LMP1 driver

Read the case

Ricardo Sanchez

Nissan Playstation GT Academy International Winner

Read the case

used by

Frank Biela

5x Le Mans 24h Winner, DTM & BTCC champion

Read the case

used by

Niall Quinn

3x Irish national kart champion and SEAT Supercup race winner

Read the case

Used by

Graham Carroll

2015 Walter Hayes Trophy Champion

Read the case

used by

Otto Rensing

Double German F3 vice-champion & Nürburgring 24h winner

Read the case

Used by

Wolfgang Reip

Bathurst 12 Hour and Blancpain Endurace Series Champion

Read the case